"Product comparison"

* The powerduo multi-tool has a medium flat screwdriver, but it doesn't have a wire crimper.
* The powerduo multi-tool has a hard wire cutter, but it doesn't have a ruler.
* The powerlock eod 2.0 fuzewell spike has a wood saw, but it doesn't have a toothpick.
* The powerduo multi-tool has a can opener, but it doesn't have a scissors.
*The powerlock eod 2.0 fuzewell has a wire crimper, but it doesn't have a tweezers.

Conclusion: 

The two multi-tool have different color, size, tools and aspect, but the powerlock eod have 17 tool count and the powerduo only 11, the two multi-tool's are similar in our tools, and it's have an only tool for it. 

Reporte y tabla de costos

Domotic House

This project consist in a smart house. the humanity is updating whit this change and advances.this project is one of this changes of technology in the world, i think this Project have excelent results in the future, because all of the things we are see we can aply in the life, in the moment my and my team are very satisficed about the house and the teamwork, in the Project we implemmented all the materias for example: chemistry for give energy with the Daniell battery, Program for the communication to the computer and the house, Electricity to know all the energy we need and measure the energy intensity, etc… To finish the house we need work in team and finish the program to connect the computer with the domotic house, and do 6 cells for the Daniell battery, and implementa ll the materias in the Project.

Bike Assembly

Crankset	is the component of a bicycle drivetrain that converts the reciprocating motion of the rider's legs into rotational motion used to drive the chain or belt, which in turn drives the rear wheel. It consists of one or more sprockets, also called chainrings or chainwheels attached to the cranks, arms, or crankarms to which the pedals attach. It is connected to the rider by the pedals, to the bicycle frame by the bottom bracket, and to the rear sprocket, cassette or freewheel via the chain.
Handlebars	Device made up of two handles connected by a tuve, for streering the bicycle
Pedals	Part of a machine or device which is operated by foot and transmits motion to a mechanism
Clips	A bicycle pedal is the part of a bicycle that the rider pushes with their foot to propel the bicycle. It provides the connection between the cyclist's foot or shoe and the crank allowing the leg to turn the bottom bracket spindle and propel the bicycle's wheels.
Straps	A strap, sometimes also called strop, is an elongated flap or ribbon, usually of fabric or leather.
Nuts	a block, usually of metal, made with a threaded hole so that it can be screwed down on a bolt to hold together objects through which the bolt passes.
Wheels	a circular frame or disk that can revolve or spin around an inner frame or on an axis, allowing an object to which it is attached to move.
Rims	the peripheral part of a wheel, to which the tyre is attached
Hub	the central portion of a wheel, propeller, fan, etc, through which the axle passes
Chains	a series of metal rings passing through one another, used for hauling, for supporting, or as decoration:
Seatpost	a piece of wood or metal put into the ground so that it stands upright and used as a support, a point to attach things
Seat	something to support a person in a sitting position,
Cog	a gearwheel, esp a small one
Lockring
Stem	Part whose height is adjustable; it is inserted into the head tube and supports the handlebars.
Grip	Also called: handgrip the strength or pressure of such a grasp, as in a handshake

Assemble a bike:

1. Install the bush en the part center of ring.

2. Place the tire in place was installed

3. Put the nuts for tightening bushing with the frame, the tire front and rear.

4. Put the bottom bracket 

5. Put the bottom bracket, place the dish together with the rod right and left.

6. Put the chain where it goes,. since this list. adjusts the Slavonic putting the bolt.

7. At the end of the connecting rod. put the pedal according to appropriate her.

8. Put the seat in the part upper of the frames, adjusting with the screw

9. Put the handlebar in the part upper front of the frames

10.Put the brakes front and rear.